Scheduled Maintenance
When the CHANGE ENGINE OIL DIC message comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
Your GM Goodwrench® dealer has GM-trained service technicians who will perform this work using genuine GM parts and reset the system.
If the engine oil life system is ever reset accidentally, you must service your vehicle within 3,000 miles (5 000 km) since your last service.
Remember to reset the oil life system whenever the oil is changed.
When the CHANGE ENGINE OIL DIC message appears, certain services, checks, and inspections are required. Required services are described in the following for “Maintenance I” and “Maintenance II.” Generally, it is recommended that your first service be Maintenance I, your second service be Maintenance II, and that you alternate Maintenance I and Maintenance II thereafter. However, in some cases, Maintenance II may be required more often.
Maintenance I — Use Maintenance I if the message comes on within 10 months since the vehicle was purchased or Maintenance II was performed.
Maintenance II — Use Maintenance II if the previous service performed was Maintenance I.
Always use Maintenance II whenever the message comes on 10 months or more since the last service or if the message has not come on at all for one year.
Scheduled Maintenance

See also:
Pulling a Trailer
Here are some important points:
• There are many laws, including
speed limit restrictions that apply
to trailering. Check for legal
requirements.
• Do not tow a trailer at all during
the ...
Programmable Automatic Door Locks
Your vehicle is equipped with an automatic
lock/unlock feature which enables you to program
your vehicle’s power door locks. You can
program this feature through the Driver Information
Center (D ...
Conditions in Which Remote Start
Will Not Work
The remote start will not operate if:
• The key is in the ignition (key
access) or the ignition is in any
position other than OFF (keyless
access).
• The transmitter is in the vehicle
(k ...
