Entry Lighting

The headlamps, taillamps, license plate lamps, back-up lamps, dome lamps, and most of the interior lights turn on briefly when the Remote Keyless Entry (RKE) is pressed. is pressed.

See Remote Keyless Entry (RKE) System Operation .

When the driver door is opened, all control lights, Driver Information Center (DIC) lights and door pocket lights turn on. After about 30 seconds the exterior lamps turn off, and then the dome and remaining interior lights will dim to off. Entry lighting can be disabled manually by changing the ignition out of the OFF position, or by pressing the RKE button. button.

This feature can be activated or deactivated in the Configuration Settings menu in the Info Display.

Press CONFIG on the audio system to call up the menu. See Vehicle Personalization .

    See also:

    Conditions in Which Remote Start Will Not Work
    The remote start will not operate if: • The key is in the ignition (key access) or the ignition is in any position other than OFF (keyless access). • The transmitter is in the vehicle (k ...

    Tire and Loading Information Label
    Label Example A vehicle specific Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar). With the driver door open, you will find the label attached below ...

    Display Settings
    Press the Config button on the Home Page or the CONFIG button on the faceplate, then select Display Settings from the list. The following options may display: Dimming Mode: Press to change the scre ...