Backglass Wiper Blade Replacement

1. Lift the wiper blade assembly up and out of

1. Lift the wiper blade assembly up and out of the park rest position.
2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so care should be used when pulling it away from the vehicle.
3. Rotate the wiper blade assembly, and pull it off of the wiper arm. Hold the wiper arm in position and push the blade away from the wiper arm.

4. Replace the wiper blade.

4. Replace the wiper blade.
5. Return the wiper blade assembly to the park rest position.

    See also:

    Exterior Lighting
    The exterior lamp control is located to the left of the steering column on the instrument panel. : Briefly turn to this position to turn the automatic lamp control off or on again. AUTO: Turn ...

    Rear Underseat Fuse Block
    The rear fuse block is located under the rear seat on the driver side. The rear seat cushion must be removed to access the rear fuse block. Removing the Rear Seat Cushion Notice: If you touch th ...

    Blizzard Conditions
    Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Assistance Program. To get help and keep everyone in the vehic ...