Curb View
Press the customization button until CURB VIEW:
OFF appears in the display. To select your preference for curb view, press the select button while CURB VIEW: OFF is displayed on the DIC. Pressing the select button will scroll through the following choices:
CURB VIEW: OFF (default): The passenger’s outside mirror will not be tilted down when the vehicle is shifted into REVERSE (R).
CURB VIEW: PASSENGER: The passenger’s outside mirror will be tilted down when the vehicle is shifted into REVERSE (R).
When the vehicle is placed in PARK (P) or in any forward gear, the mirror will return to the normal driving position, following a short delay.
Choose one of the available options and press the customization button while it is displayed on the DIC to select it and move on to the next feature.
For more information on tilt mirror in reverse.
See also:
Remote Control
To use the remote control, aim it at the transmitter
window below the video screen and press the
desired button. Direct sunlight or very bright light
may affect the ability of the RSE system to
re ...
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press
.
3. Immediately after completing Step 2, press and
hold until the turn signal lamps
flash.
When the vehicle starts, the parking lamps w ...
Brake Fluid
The brake master cylinder and, on manual transmission vehicles, the clutch hydraulic
system use the same reservoir. See Engine Compartment Overview for the location
of the reservoir. The r ...