Reducing Speed While UsingCruise Control

Press in the set button at the end of the lever until you reach the desired speed, then release it.

Each time you do this, you will go about 1 mph (1.6 km/h) slower.

    See also:

    Window Messages
    OPEN, THEN CLOSE DRIVER WINDOW This message is displayed when the window needs to be reprogrammed. If the vehicle's battery has been recharged or disconnected, you will need to reprogram each front ...

    Compass Calibration Procedure
    1. Before calibrating the compass, check that the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. ...

    Security Light
    The immobilizer light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turn ...