Reprogramming Universal HomeRemote Buttons

You can reprogram any of the three buttons by repeating the instructions.

    See also:

    Front Axle
    When to Check Lubricant It is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it insp ...

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid . PRESS BRAKE PEDAL TO RELEASE PARK BRAKE This message is displayed if you attempt to release the elec ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). The rear display briefly illuminates to indicate the system is working. URPA operates only at speeds less than 8 km/h ...