High-Beam On
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information.
See also:
Using the Call Command
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. Say “Call”. The system responds with “Call using
<phone name>. Please say the name ta ...
Weight Distributing Hitches and WeightCarrying Hitches
When using a weight-distributing hitch, the hitch
must be adjusted so the distance (A) remains
the same both before and after coupling the trailer
to the tow vehicle.
If you use a step-bumper hi ...
Turn Signals when Towing a
Trailer
The turn signal indicators on the
instrument panel flash whenever
signaling a turn or lane change.
Properly hooked up, the trailer
lamps also flash, telling other
drivers the vehicle is turni ...