OnStar® Steering Wheel Controls
Your vehicle may have a Talk/Mute button that can be used to interact with OnStar® Hands-Free Calling.
On some vehicles, you may have to hold the button for a few seconds and give the command “ONSTAR” in order to activate the OnStar® Hands-Free Calling feature.
On some vehicles, the mute button can be used to dial numbers into voicemail systems, or to dial phone extensions. See the OnStar® Owner’s Guide for more information.
See also:
Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following:
1. Open the hood.
2. Remove the grille by grasping and pulling it
forward.
3. Lift the two headlamp retaining clips.
4. Pull the headlamp assembly away from ...
Using the Delete All Name Tags Command
The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if stored.
To delete all name tags:
1. Press
.
► For vehicles without a navigation sy ...
Hood Release
To open the hood:
1. Pull the hood release
handle inside the
vehicle. It is located
next to the parking
brake pedal near the
floor.
2. Then go to the front of the vehicle and pull the ...