Compass Variance
Compass variance is the difference between earth’s magnetic north and true geographic north. The mirror is set to zone eight upon leaving the factory.
It will be necessary to adjust the compass to compensate for compass variance if you live outside zone eight. Under certain circumstances, such as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
If not adjusted to account for compass variance, your compass could give false readings.
To adjust for compass variance, do the following:
1. Find your current location and variance zone number on the following zone map.
2. Press and hold the on/off button for
six seconds. Release the button when
(FOR ZONE) is displayed. The number
shown is the current zone number.
3. Scroll through the zone numbers that appear in
the window on the mirror by pressing the on/off
button. Once you find your zone number,
release the button. After about four seconds,
the mirror will return to the compass display,
and the new zone number will be set.
See also:
Front Seat
Front Seat
To raise or lower the head restraint,
press the release button located on
the side of the head restraint and
pull up or push the head restraint
down and release the button.
Pull ...
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor):
Seating positions with top tether anchors.
(Lower Anchor): Seating positions with two lower anchors.
To assist you in locating the lower anchors, each rear anc ...
Ejecting a Disc (DVD Player with Sunroof)
Press and hold the stop/eject button for more
than two seconds on the DVD player faceplate to
eject the disc. There is not an eject button on
the remote control.
If a disc is ejected from the pl ...