Doors and Locks

See also:

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister ...

Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar A. Taillamp B. Turn Signal Lamp C. Stoplamp/Taillamp To replace any one of these bulbs: 1. Open the trunk. 2. Remove the push pins securing the trunk ...

Jump Starting
For more information about the vehicle battery, see Battery . If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following step ...