See also:

License Plate Lamp
To replace one of these bulbs, do the following: 1. Remove the two screws holding the license plate lamp lens. 2. Pull the lens away from the lamp assembly. 3. Pull the old bulb from the bulb ...

Storing the Tire Sealant and Compressor Kit
To access the tire sealant and compressor kit: 1. Open the trunk. See Trunk. 2. Lift the cover. With Pressure Relief Button With Pressure Deflation Button 3. Turn the wing nut countercloc ...

Tilt Wheel
The tilt lever is located on the left side of the steering column. To adjust the lever: 1. Hold the wheel and pull the lever toward you. 2. Move the steering wheel up or down into a comfort ...