Rear Seats
Rear Seat Operation
Your vehicle has flip and fold second row seats which provide additional cargo space.
To flip and fold the seat(s), do the following:
1. Pull up on the loop located where the seat cushion meets the seatback and flip the seat cushion forward.
Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.
2. Lift the lever, located on the outboard side of the seatback, and fold the seatback forward.
The head restraint will automatically fold out of the way as the seatback is folded down.
To return the seat(s) to the original position, do the following:
CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
1. Lift the seatback until it locks into the upright position. Push and pull on the seatback to make sure it is locked.
2. Return the head restraints to the upright position by reaching behind the seat and pulling it forward until it locks into place.
Push and pull on the head restraint to make sure that it is locked.
3. Flip the seat cushion back into place.
See also:
California Proposition 65 Warning
Most motor vehicles, including this one, contain and/or emit chemicals known
to the State of California to cause cancer and birth defects or other reproductive
harm. Engine exhaust, many parts and ...
Entry Lighting
The headlamps, parking lamps, taillamps, and most of the interior lamps turn
on briefly when is pressed on the
Remote Keyless Entry (RKE) transmitter. After about 30 seconds the exterior lamps
...
Securing an Add-On Child Restraint in
the Vehicle
WARNING:
A child can be seriously injured or killed in a crash
if the child restraint is not properly secured in the
vehicle. Secure the child restraint properly in the
vehicle using the vehicl ...