Easy Exit Seat
The control for the easy exit seat function is located on the driver’s door below the memory buttons 1 and 2. The easy exit seat button is used to program and recall the desired driver’s seat position when exiting or entering the vehicle. The mirrors, power lumbar, recline, and adjustable pedals, if equipped, positions will not be stored or recalled when using the easy exit seat function. The seat position can be saved for up to two drivers.
To store the easy exit seat position, do the following:
1. Press and release the 1 or 2 button of the memory control for less than three seconds.
The seat will move to the stored memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the easy exit seat button
for more than three seconds. A double
chime will sound to let you know that the
position has been stored for the selected
button 1 or 2.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
To recall the easy exit seat position, do one of the following:
• Press the easy exit seat button on the
memory control while the vehicle is in
PARK (P). The seat will move to the stored
exit position.
• Or, if the easy exit seat feature is activated in
the Driver Information Center (DIC), removing
the key from the ignition will move the seat
to the exit position. See “Easy Exit Seat” under
DIC Vehicle Customization on page 208 for
more information on activating this feature in
the DIC.
If an easy exit seat position has not been stored, the default position is all the way rearward.
See also:
Reading Lamps
The reading lamps are located in the front console.
Press the lens on the lamps to turn the reading
lamps on or off. ...
Express Window Operation
Windows with an express-up or down feature allow the front windows to be lowered
or raised without holding the switch. Rear windows only have express-down. Pull
a window switch up or push it down ...
Exiting the Feature Settings Menu
The feature settings menu will be exited when any of
the following occurs:
• The vehicle is shifted out of P (Park).
• The vehicle is no longer in ON/RUN.
• The trip/fuel or vehicle informa ...