Navigation

OnStar navigation requires the Directions and Connections service plan.

Push them sent to the vehicle navigation screen. Destinations can also be forwarded to to receive directions or have them sent to the vehicle navigation screen. Destinations can also be forwarded to the vehicle from Google Maps™ or MapQuest.com. The OnStar mapping database is continuously updated. Visit www.onstar.com for coverage maps.

Turn-by-Turn Navigation

1. Push 2. Request directions. to connect to a live Advisor.

2. Request directions.

3. Directions are downloaded to the vehicle.

4. Follow the voice-guided commands.

Using Voice Commands During a Planned Route

Cancel Route

1. Push ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel. System responds: “OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?”

2. Say “Yes.” System responds: “OK, route canceled.”

3. Say “Goodbye.” Exits voice commands.

Route Preview

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Route Preview.” System responds with the next three maneuvers.

3. Say “Goodbye.” Exits voice commands.

Repeat

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Get My Destination

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Other Navigation Services Available from OnStar

OnStar eNav: Allows subscribers to send destinations from Google Maps™ and MapQuest.com to their Turn-by-Turn Navigation or screen-based navigation system. When ready, the directions will be downloaded to the vehicle.

Destination Download: Push request the Advisor to download directions to the navigation system in the vehicle., then request the Advisor to download directions to the navigation system in the vehicle. After the call ends, push the “Go” button on the navigation screen to begin driving directions.

Destinations can also be downloaded on the go. For information about eNav, Destination Download, and coverage maps visit www.onstar.com.

    See also:

    Engine Heater
    The engine coolant heater, if available, can help in cold weather conditions at or below −18°C (0°F) for easier starting and better fuel economy during engine warm-up. Plug in the coo ...

    Brakes
    This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go o ...

    Exterior Care
    Cleaning Exterior Lamps/ Lenses Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps and lenses. Follow instructions under “Washing the Vehicle” later in ...