Sheet Metal Damage

If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.

Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.

    See also:

    Removing the Spare Tire and Tools
    The equipment you will need is located in the trunk. 1. Open the trunk. See Trunk. 2. Turn the center retainer counterclockwise to remove it. 3. Lift and remove the compact spare tire cover ...

    Front Axle
    When to Check Lubricant It is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it insp ...

    Cleaning Exterior Lamps/Lenses and Emblems
    Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps and lenses. Follow instructions under "Washing the Vehicle" later in this section. ...