Dolly Towing

Tow the vehicle with the two rear wheels on the ground and the front wheels on a dolly.
To tow the vehicle with two wheels on the ground and a dolly:
1. Put the front wheels on a dolly.
2. Put the gear shift lever in P (Park).
3. Set the parking brake.
4. Remove the key from the ignition.
5. Secure the vehicle to the dolly.
6. Release the parking brake.

Notice: Towing the vehicle from the rear could damage it. Also, repairs would
not be covered by the vehicle warranty. Never have the vehicle towed from the rear.
See also:
Hitches
It’s important to have the correct hitch equipment.
Crosswinds, large trucks going by and rough roads
are a few reasons why you’ll need the right hitch. ...
Weatherstrips
Apply silicone grease on
weatherstrips to make them last
longer, seal better, and not stick or
squeak. See Recommended Fluids
and Lubricants. ...
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or the is pressed, the
cruise control is disengaged without
erasing the set speed from memory.
Once the vehicl ...
