Tire Rotation

Tires should be rotated every 12 000 km (7,500 mi). See Maintenance Schedule .

Tires are rotated to achieve a uniform wear for all tires. The first rotation is the most important.

Any time unusual wear is noticed, rotate the tires as soon as possible and check the wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires  and Wheel Replacement .

Use this rotation pattern when rotating the tires.

Use this rotation pattern when rotating the tires.

Do not include the compact spare tire in the tire rotation.

Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated.

See Tire Pressure  and Vehicle Load Limits .

Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation .

Check that all wheel nuts are properly tightened. See“Wheel Nut Torque” under Capacities and Specifications .

Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheelWARNING

Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.

In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt.

Lightly coat the center of the wheel hub with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the flat wheel mounting surface or on the wheel nuts or bolts.

    See also:

    Automatic Transmission Fluid
    How to Check Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle ...

    Infotainment System Menus
    Tone Settings To access the tone settings, press the Home Page Tone button or the TONE button on the faceplate. Use the tone settings to adjust the following features: • Setting the tone ...

    Luxurious interior experience
    Inside, the two-tone interior is defined by a flowing, uninterrupted design theme that wraps around the instrument and door panels. Attention to detail is evident throughout the interior, includin ...