Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a new one of the identical size and rating.
Fuses of the same amperage can be temporarily borrowed from another fuse location, if a fuse goes out. Replace the fuse as soon as possible.
To identify and check fuses, circuit breakers, and relays, see Engine Compartment Fuse Block , Instrument Panel Fuse Block , and Rear Compartment Fuse Block .
See also:
Lumbar Adjustment
Lumbar Adjustment
To adjust the lumbar support,
if available:
• Press and hold the front or rear
of the control to increase or
decrease lumbar support.
• Press and hold the top or botto ...
Trunk Release
In addition to the trunk release button on the RKE
transmitter, there is a remote release
button located
on the instrument panel.
See Trunk. ...
Body Component Lubrication
Lubricate all key lock cylinders, hood hinges, liftgate hinges, trunk hinges
and steel fuel door hinge unless the components are plastic. Applying silicone grease
on weatherstrips with a clean clo ...