Clock

The infotainment system controls are used to access the time and date settings through the menu system. See Operation  for information about how to use the menu system.

Setting the Time and Date

1. Press the CONFIG button and select Time and Date Settings.

2. Select Set Time or Set Date.

3. Turn the 4. Press the knob to select the next value. knob to adjust the highlighted value.

4. Press the 5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the knob after adjusting the minutes. knob to select the next value.

5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the Setting the 12/24 Hour Format knob after adjusting the minutes.

Setting the 12/24 Hour Format

1. Press the CONFIG button and select Time and Date Settings.

2. Highlight 12/24 HR Format.

3. Press the Setting the Month and Day Format knob to select the 12 hour or 24 hour display format.

Setting the Month and Day Format

1. Press the CONFIG button and select Time and Date Settings.

2. Highlight Month & Day format.

3. Press the Power Outletsknob to select DD/MM/YYYY (day/month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/DD (year/month/ day) display format.

    See also:

    Infotainment System Overview
    The infotainment system is controlled by using the buttons on the faceplate and the touch screen. See “Infotainment Control Buttons” in this section for more information. A. VOL/ (Volum ...

    Fog Lamps
    Use the fog lamps for better vision in foggy or misty conditions. The ignition must be in RUN for the fog lamps to work. The fog lamp button is located on the instrument panel to the right of ...

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARK ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the URPA system doe ...