Checking Brake Fluid
The brake/clutch fluid can be checked without taking off the cap by looking at the brake/clutch fluid reservoir.
The fluid level should be above MIN. If it is not, have the brake/ clutch hydraulic system checked to see if there is a leak.
After work is done on the brake/ clutch hydraulic system, make sure the level is above MIN but not over the MAX mark.
When the brake/clutch fluid falls to a low level, the brake warning light comes on. See Brake System Warning Light .
See also:
How to Add Coolant to the CoolantRecovery Tank
If you have not found a problem yet, but the
coolant level is not at the FULL COLD mark, add
a 50/50 mixture of clean, drinkable water and
DEX-COOL® engine coolant at the coolant
recovery tank.
...
Buying New Tires
GM has developed and matched specific tires for the vehicle.
The original equipment tires installed were designed to meet General Motors Tire Performance Criteria Specification (TPC Spec) system rati ...
Starting the Vehicle
To start the engine using the remote start feature:
1. Aim the RKE transmitter at the vehicle.
2. Press and release .
3. Immediately after completing Step 2, press and hold
until the turn signa ...