See also:

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
A. Back-Up Lamp B. Turn Signal Lamp To replace one of these lamps: 1. Open the trunk. See Trunk. 2. Remove the fasteners and pull back the trunk trim. 3. Remove the four plastic wing nuts h ...

Certification Label
Label Example A vehicle-specific Certification label is attached to the vehicle's center pillar (B-pillar). The label tells the gross weight capacity of the vehicle, called the Gross Vehi ...

Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following: 1. Open the hood. 2. Remove the grille by grasping and pulling it forward. 3. Lift the two headlamp retaining clips. 4. Pull the headlamp assembly away from ...