Ride Control Systems
See also:
Using the Re-dial Command
1. Press and hold for two
seconds. The system
responds with “Ready” followed by a tone.
2. After the tone, say “Re-dial”. The system responds
with “Re-dial using <phone name> ...
Removing the Spare Tire and Tools
The jacking equipment you will need is stored
under the rear seat on the passenger’s side of the
vehicle.
To release the jack from its holder, turn the
knob on the jack counterclockwise to low ...
Entry Lighting
The headlamps, taillamps, license plate lamps, back-up lamps, dome lamps, and most of the interior lights turn on briefly when the Remote Keyless Entry (RKE)
is pressed.
See Remote Keyless Entry ...
