See also:

Ignition Positions
Use the key to turn the ignition switch to four different positions. A (LOCK): This position locks the ignition and transmission. It is a theft-deterrent feature. You will only be able to remo ...

Parking/Turn Signal Lamp
1. Open the hood. See Hood . 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straig ...

Jump Starting (On-board with eAssist Only)
If the vehicle fails to crank, it may be jump started by using the eAssist battery to charge the 12-volt battery. Use the following procedure to activate the on-board jump start using the DIC ...