Rear Window Defogger
(Rear Window Defogger): Press to
turn the rear window defogger on or off.
The rear window defogger turns off automatically after about 10 minutes. If turned on again it runs for about five minutes before turning off.
The rear window defogger can be set to automatic operation; see “Climate and Air Quality” under Vehicle Personalization . When auto rear defog is selected, the rear window defogger turns on automatically when the interior temperature is cold and the outside temperature is about 4°C (40°F) and below. The auto rear defogger turns off automatically after about 10 minutes. At higher speeds, the rear window defogger may stay on continuously.
For vehicles with heated outside rearview mirrors, they turn on when the rear window defogger button is on and help to clear fog or frost from the surface of the mirrors. See Heated Mirrors .
Notice: Do not try to clear frost or other material from the inside of the front
windshield and rear window with a razor blade or anything else that is sharp. This
may damage the rear window defogger grid and affect your radio's ability to pick
up stations clearly. The repairs would not be covered by your warranty.
or
(Heated Seats, If Equipped): Press
to turn the heated seats on or off. See Heated Front Seats .
(Heated Steering Wheel, If Equipped):
Press to turn the heated steering wheel on or off. See Heated Steering Wheel .
Remote Start Climate Control Operation: For vehicles with the remote vehicle start feature, the climate control system may run when the vehicle is started remotely. The system will default to a heating or cooling mode depending on the outside temperature and then go back to the previous settings. See Remote Vehicle Start . The rear window defogger turns on if it is cold outside.
See also:
Vehicle Care/Appearance Materials
...
Care of the CD Player
Do not add any label to a CD, it could get caught in the
CD player. If a CD is recorded on a personal computer
and a description label is needed, try labeling the top of
the recorded CD with a m ...
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from you ...
