Automatic Operation
The system automatically controls the fan speed, air delivery, air conditioning, and recirculation in order to heat or cool the vehicle to the desired temperature.
When the AUTO indicator light is on, the system is in full automatic operation. If the air delivery mode or fan setting is manually adjusted, the auto indicator turns off and displays will show the selected settings.
To place the system in automatic mode do the following:
1. Press AUTO.
2. Set the temperature. Allow the system time to stabilize. Then adjust the temperature as needed for best comfort.
English units can be changed to metric units through the Driver Information Center (DIC). See Vehicle Personalization .
See also:
Remote Control
To use the remote control, aim it at the transmitter
window below the video screen and press the
desired button. Direct sunlight or very bright light
may affect the ability of the RSE system to
re ...
Lower Anchor and Top Tether
Anchor Locations
Rear Seat
(Top Tether Anchor): Seating
positions with top tether anchors.
(Lower Anchor): Seating
positions with two lower anchors.
To assist in locating the lower
anchors, each rear an ...
Brake Fluid
The brake master cylinder and, on manual transmission vehicles, the clutch hydraulic
system use the same reservoir. See Engine Compartment Overview for the location
of the reservoir. The r ...