Transferring a Call

Audio can be transferred between the Bluetooth system and the cell phone.

The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

To Transfer Audio from the Bluetooth System to a Cell Phone

During a call with the audio in the vehicle:

1. Press 2. Say “Transfer Call.”.

2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System from a Cell Phone

During a call with the audio on the cell phone, press If the audio does not transfer to the vehicle, use the audio transfer feature on. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.

    See also:

    Rainsense™ II Wipers
    If the vehicle has this feature, the moisture sensor is mounted on the interior of the windshield beside the rearview mirror and is used to automatically operate the wipers. This system operates ...

    If No Steam Is Coming from the Engine Compartment
    If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: ► Climbs a long ...

    Automatic Transmission
    The automatic transmission has a shift lever located on the console between the seats. The mode or selected gear is shown in the instrument cluster P (Park): This position locks the drive wheels ...