Listing Stored Numbers

The list command will list all the stored numbers and name tags.

Using the “List” Command

1. Press followed by a tone.. The system responds “Ready,” followed by a tone.

2. Say “Directory.”

3. Say “Hands-Free Calling.”

4. Say “List.”

    See also:

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. The coolant level should be at or above the FULL COLD mark when the engine is cold. The coolant level should be above the ...

    StabiliTrak® Indicator Light
    This warning light should come on briefly when the engine is started. During most driving conditions, this light will not come on. If the StabiliTrak® System is actively controlling the sta ...

    Lower Anchor and Top Tether Anchor Locations
    Rear Seat (Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. To assist in locating the lower anchors, each rear an ...