Error Messages
If Disc Read Error displays and/or the disc comes out, it could be for one of the following reasons:
- The disc has an invalid or unknown format.
- The disc is not from a correct region.
- The disc is very hot. Try the disc again when the temperature returns to normal.
- The road is very rough. Try the disc again when the road is smoother.
- The disc is dirty, scratched, wet, or upside down.
- The air is very humid. Try the disc again later.
- There was a problem while burning the disc.
- The label is caught in the CD player.
If the CD is not playing correctly, for any other reason, try a known good CD.
If any error continues, contact your dealer.
See also:
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press
and hold until the parking lamps
turn off.
• Turn on the hazard warning flashers.
• Turn the ignition switch ...
DSP (Digital Signal Processing)
Settings
For vehicles with DSP, it is used to
provide a choice of different
listening experiences.
The DSP settings for the radio with
CD are:
• normal - Select this setting to
adjust the audio for ...
Child Restraint Systems
A rear-facing infant
seat (A) provides restraint
with the seating surface
against the back of
the infant.
The harness system holds the infant in place and, in a
crash, acts to keep the in ...
