Selecting an XM Channel

XM channels can be selected by usingsor , the TUNE/ MENU knob, or the TUNE/MENU or system., the TUNE/ MENU knob, or the TUNE/MENU system.

Selecting a Channel Using or

  • Press and release to go to the previous or next or channel. to go to the previous or next channel.
  • Press and hold \to scroll through the previous or or next channel until the channel is reached. \to scroll through the previous or next channel until the channel is reached.

Selecting a Channel Using the TUNE/MENU Knob

To select a channel using the TUNE/MENU knob:

1. Turn the TUNE/MENU knob and select Channel List.

2. Select the desired channel.

Selecting a Channel Using the TUNE/MENU System

1. Turn the TUNE/MENU knob.

2. Select XM Category List.

3. Select the category.

4. Select the channel.

    See also:

    When the Light Is On Steady
    This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Vehicle Messages for more informati ...

    Delayed Locking
    When locking the doors with the power lock switch and a door is open, the doors will lock five seconds after the last door is closed. You will hear three chimes to signal that the delayed lo ...

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid . PRESS BRAKE PEDAL TO RELEASE PARK BRAKE This message is displayed if you attempt to release the elec ...