Display Settings
Press the Config button on the Home Page or the CONFIG button on the faceplate, then select Display Settings from the list.
The following options may display: Dimming Mode: Press to change the screen background. The Automatic setting adjusts the screen background automatically depending on the exterior lighting conditions.
To change the overall brightness setting for the display, use the vehicle interior lighting instrument panel illumination control.
See also:
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor):
Seating positions with top tether anchors.
(Lower Anchor): Seating positions with two lower anchors.
To assist you in locating the lower anchors, each rear anc ...
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
1. Press and hold for two seconds.
The system
responds with “Ready” followed by a tone.
2. S ...
TPMS Malfunction Light and Message
The TPMS will not function properly if one or more of the
TPMS sensors are missing or inoperable. When the
system detects a malfunction, the low tire warning light
flashes for about one minute a ...