Flash-to-Pass
To flash the high beams, pull the turn signal/lane change lever all the way toward you. Then release it.
See also:
Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following:
1. Open the hood.
2. Remove the grille by grasping and pulling it
forward.
3. Lift the two headlamp retaining clips.
4. Pull the headlamp assembly away from ...
Tilt Wheel
The tilt lever is located on
the left side of the steering
column.
To adjust the lever:
1. Hold the wheel and pull the lever toward you.
2. Move the steering wheel up or down into a
comfort ...
Entering the Personalization Menus
1. Press CONFIG to access the Configuration Settings menu.
2. Turn the TUNE/MENU knob to highlight Vehicle Settings. Press the CONFIG button
until Vehicle is highlighted on vehicles with a navigati ...