Headlamp High/Low-Beam Changer

(Headlamp High/Low-Beam Changer):
Push the turn signal/ lane change lever away from you and release, to turn the high
beams on.
To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the instrument panel cluster when the high-beam headlamps are on.
See also:
Universal Home Remote System (With Three Round LED)
The Universal Home Remote System provides a
way to replace up to three hand-held
Radio-Frequency (RF) transmitters used to
activate devices such as garage door openers,
security systems, and home ...
Navigation System
If the vehicle has a navigation
system, use of the system may
result in the storage of destinations,
addresses, telephone numbers, and
other trip information. Refer to the
navigation manual ...
All-Wheel Drive
When to Check Lubricant
It is not necessary to regularly check fluid unless
you suspect there is a leak or you hear an
unusual noise. A fluid loss could indicate a
problem. Have it inspected and r ...
