Airbag System Check
The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light for more information.
Notice: If an airbag covering is damaged, opened, or broken, the airbag may not
work properly. Do not open or break the airbag coverings. If there are any opened
or broken airbag covers, have the airbag covering and/or airbag module replaced.
For the location of the airbags, see Where Are the Airbags? . See your dealer for
service.
See also:
When to Check and Change Automatic
Transmission Fluid
A good time to check the automatic transmission fluid
level is when the engine oil is changed.
Change the fluid and filter at the intervals listed in
Scheduled Maintenance and be sure to
use th ...
Manual Seats
1. Lift the bar under the seat to unlock the seat.
2. Slide the seat to the desired position and release
the bar.
Try to move the seat to be sure it is locked in place.
See Manual Seats. ...
How the System Works
URPA comes on automatically when
the shift lever is moved into
R (Reverse). A single tone sounds
to indicate the system is working.
URPA operates only at speeds less
than 8 km/h (5 mph).
An ...