Door Locks

Unlocked doors can be dangerous.WARNING

Unlocked doors can be dangerous.

  • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven.
  • Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.
  • Outsiders can easily enter through an unlocked door when slowing or stopping the vehicle. Lock the doors to help prevent this from happening. 

To lock or unlock the door from outside the vehicle, press transmitter or use the key in the driver door. on the Remote Keyless Entry (RKE) transmitter or use the key in the driver door.

From inside the vehicle with the doors locked, pull once on the door handle to unlock it, and a second time to open it.

Push down on the door lock knob on the top of the door.

Manually locking the driver door also automatically locks all other doors.

For more information see:

  • Remote Keyless Entry (RKE) System Operation .
  • Power Door Locks .
  • Vehicle Personalization .
    See also:

    Customer Assistance Offices (Mexico)
    To contact the Customer Assistance Center (CAC), use the phone numbers listed in this section. Customer assistance is available Monday through Friday, 08:00 to 20:00 hours, and Saturdays from ...

    Power Seat Adjustment
    To adjust the power driver seat, if equipped: Move the seat forward or rearward by sliding the control forward or rearward. Raise or lower the front part of the seat cushion by moving the fron ...

    Selecting the Right Engine Oil
    Selecting the right engine oil depends on both the proper oil specification and viscosity grade: Specification (Except 2.0L Turbo Engine) Use and ask for engine oils with the dexos™ certification ...