Conditions in Which Remote Start Will Not Work

The remote vehicle start feature will not operate if:

  • The key is in the ignition (key access) or if the key is in the vehicle (keyless access).
  • The hood is not closed.
  • The hazard warning flashers are on.
  • The malfunction indicator lamp is on.
  • The engine coolant temperature is too high.
  • The oil pressure is low.
  • Two remote vehicle starts, or a single remote start with an extension, have already been used.
  • The vehicle is not in P (Park).
    See also:

    Your Responsibility
    You may need to increase the volume of your radio to hear the OnStar® advisor. If the light next to the OnStar® buttons is red, this means that your system is not functioning properly and should ...

    System Identification
    If the vehicle has the tire sealant and compressor kit shown above, see the operating instructions that follow. If the vehicle has the tire sealant and compressor kit shown above, follo ...

    Using the Re-dial Command
    1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone. ► For vehicles with a navigation system, the system responds with a tone. Aft ...