Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.
If there is a decrease in the RKE operating range:
- Check the distance. The transmitter may be too far from the vehicle.
- Check the location. Other vehicles or objects may be blocking the signal.
- Check the transmitter's battery. See “Battery Replacement” later in this section.
- If the transmitter is still not working correctly, see your dealer or a qualified technician for service.
See also:
Using the Delete Command
The delete command allows specific name tags to be
deleted.
To use the delete command:
1. Press and hold for two seconds.
The system
responds with “Ready” followed by a tone.
2. Say “D ...
Select Button
(Select): Press the
select button to reset
certain DIC functions, turn off or acknowledge
messages on the DIC display, and set your
customization settings. For example, this button
will allow y ...
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time and Date Settings,
or press .
2. Highlight Set Time Format.
3. Press SELECT to select the
12 hour or 24 hour display
format. ...