See also:

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister ...

Stoplamp,Taillamp, and Turn Signal Lamp
Driver Side Shown, Passenger Side Similar A. Taillamp B. Turn Signal Lamp C. Stoplamp/Taillamp To replace any one of these bulbs: 1. Open the trunk. 2. Remove the push pins securing the trunk ...

Compass Calibration
Press and hold the on/off button to activate the compass calibration mode. CAL will be displayed in the compass window on the mirror. The compass can be calibrated by driving the vehicle in circ ...