StabiliTrak® System

The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system turns on automatically every time the vehicle is started.

► To turn off both traction control and StabiliTrak, press and hold the TCS/StabiliTrak button, located on the instrument panel, until illuminate in the instrument cluster and the appropriate DIC message is displayed. See Ride Control System Messages and . illuminate in the instrument cluster and the appropriate DIC message is displayed. See Ride Control System Messages .

► Press and release the TCS/ StabiliTrak button to turn on both systems.

For more information, see StabiliTrak® System .

    See also:

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An ...

    Park Brake and P (Park) Mechanism Check
    WARNING When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it ...

    Driving in Water
    Heavy rain can mean flash flooding, and flood waters demand extreme caution. Find out how deep the water is before you drive through it. If it is deep enough to cover your wheel hubs, axles, or ...