Lamps
Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road.
• Signs that the headlamps need attention include dimming, failure to light, cracking, or damage.
The brake lamps need to be checked periodically to ensure that they light when braking.
• With a multi-point inspection, your dealer can check the lamps and note any concerns.
See also:
Automatic Operation
AUTO (Automatic): When automatic operation
is active, the system will control the inside
temperature, the air delivery mode, and the
fan speed.
Use the steps below to place the entire system in
...
Fuses and Circuit Breakers
The wiring circuits in the vehicle are
protected from short circuits by a
combination of fuses and circuit
breakers. This greatly reduces the
chance of damage caused by
electrical problems.
...
Erasing Universal Home RemoteButtons
To erase programming from the three Universal
Home Remote buttons do the following:
1. Press and hold down the two outside buttons
until the indicator light begins to flash, after
20 seconds. Do ...
