Transmission
Automatic Transmission

P: Park
R: Reverse
N: Neutral
D: Drive
Manual Mode
Move the selector lever from D (Drive) to the left. Press the shift lever forward (+) to upshift or rearward (−) to downshift.
The selector lever can only be moved out of P (Park) when the ignition is on and the brake pedal is applied. To engage P (Park) or R (Reverse), push the release button.
See Automatic Transmission .
See also:
Taillamps and Turn Signal Lamps
To replace a taillamp or turn signal bulb, do
the following:
1. Open the liftgate.
2. Remove the two
screws from the
taillamp assembly.
3. Pull the taillamp assembly away from the
vehicle ...
Setting Cruise Control
Cruise control will not work if the parking brake is set, or
if the master cylinder brake fluid level is low.
The cruise control light on the instrument panel cluster
comes on after the cruise co ...
Changing a Flat Tire
If a tire goes flat, avoid further tire and wheel
damage by driving slowly to a level place. Turn on
your vehicle’s hazard warning flashers.
CAUTION:
Changing a tire can be dangerous. The
veh ...
