Exterior Lighting

The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.

The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.

The knob returns to the AUTO position after it is released. Turn to off again to reactivate the AUTO mode. : Turns off the exterior lamps.

The knob returns to the AUTO position after it is released. Turn to off again to reactivate the AUTO mode.

In Canada, the headlamps will automatically reactivate once the vehicle is shifted out of P (Park).

AUTO: Automatically turns the exterior lamps on and off, depending on outside lighting.

The current status of the AUTO system is displayed in the Driver Information Center (DIC) display.

See Driver Information Center (DIC) .

: Turns on the headlamps, parking lamps, instrument panel lights, and other exterior lighting. : Turns on the parking lamps, instrument panel lights, and other exterior lighting.

For more information, see: : Turns on the headlamps, parking lamps, instrument panel lights, and other exterior lighting.

For more information, see:

► Exterior Lamp Controls .
► Daytime Running Lamps (DRL) .
► Fog Lamps .

    See also:

    What Kind of Engine Oil to Use
    Look for three things: • GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thi ...

    Increasing Speed While Using Cruise Control
    To increase the cruise speed while using cruise control: • Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. • To increase vehicle spe ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). The rear display briefly illuminates to indicate the system is working. URPA operates only at speeds less than 8 km/h ...