High Voltage Devices and Wiring
WARNING!
Exposure to high voltage can
cause shock, burns, and even
death. The high voltage
components in the vehicle can
only be serviced by technicians
with special training.
High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.
See also:
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press
.
3. Immediately after completing Step 2, press and
hold until the turn signal lamps
flash.
When the vehicle starts, the parking lamps w ...
Brake System Warning Light
The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need ...
Jump Starting
For more information about the vehicle battery, see Battery If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle.
Be sure to use the following st ...