Ignition Transmission Lock Check

While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.

• The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).

• With the key access ignition system, the ignition key should come out only in LOCK/OFF.

See Ignition Positions (Key Access) or Ignition Positions (Keyless Access).

Contact your dealer if service is required.

    See also:

    Reprogramming a Single Universal Remote System Button
    To reprogram any of the three Universal Remote system buttons: 1. Press and hold the desired Universal Remote system button. Do not release the button. 2. The indicator light will begin to ...

    Wheels and Trim—Aluminum or Chrome
    Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied. Keep the wheels clean using ...

    Steering Column Shift Lever
    If the vehicle has a steering column shift lever, use this procedure to shift the vehicle into P (Park): 1. Hold the brake pedal down. 2. Move the shift lever into P (Park) by pulling the shift ...