See also:

Removing the Flat Tire andInstalling the Spare Tire
1. If your vehicle has a wheel cap that covers the wheel nuts, position the chisel end of the wheel wrench in the notch and pry it off. 2. Using the wheel wrench, loosen all the wheel nuts. ...

Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: ...

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. ...