Making Turns
Notice:
Making very sharp turns
while trailering could cause the
trailer to come in contact with the
vehicle. The vehicle could be
damaged. Avoid making very
sharp turns while trailering.
When turning with a trailer, make wider turns than normal so the trailer will not strike soft shoulders, curbs, road signs, trees, or other objects. Use the turn signal well in advance and avoid jerky or sudden maneuvers.
See also:
Ultrasonic Parking Assist
For vehicles with the Ultrasonic Rear Parking Assist (URPA) system, it assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph), and ...
Rocking the Vehicle to Get it Out
Turn the steering wheel left and right to clear the area around the front wheels.
Turn off any traction system. Shift back and forth between R (Reverse) and a forward
gear, or with a manual transm ...
Driving On Grades
Reduce speed and shift to a lower gear before starting down a
long or steep downgrade. If the transmission is not shifted down, the brakes might
have to be used so much that they would get hot and ...
