Voice Pass-Thru

Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature.

To access contacts stored in the cell phone:

1. Press responds “Ready,” followed by. The system responds “Ready,” followed by a tone.

2. Say “Bluetooth.” This command can be skipped.

3. Say “Voice.” The system responds “OK, accessing <phone name>.”.

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions.

    See also:

    Jump Starting (with or without eAssist)
    For more information about the vehicle battery, see Battery. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following ...

    Ultrasonic Parking Assist
    For vehicles with this feature, it uses sensors on the rear bumper to detect objects while parking the vehicle. It operates at speeds less than 8 km/h (5 mph) while in R (Reverse). URPA uses aud ...

    Windshield Wiper/Washer
    The windshield wiper lever is on the right side of the steering column. With the ignition in ACC/ ACCESSORY or ON/RUN, move the windshield wiper lever to select the wiper speed. 2: Use for fast ...