Pairing

A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See OnStar Overview for more information.

Pairing Information

• A Bluetooth phone with MP3 capability cannot be paired to the vehicle as a phone and an MP3 player at the same time.

• Up to five cell phones can be paired to the Bluetooth system.

• The pairing process is disabled when the vehicle is moving.

• Pairing only needs to be completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

• Only one paired cell phone can be connected to the Bluetooth system at a time.

• If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Pairing a Phone

1. Press the CONFIG button.

2. Select Phone Settings or Bluetooth Settings (depending on the radio).

3. Select Bluetooth.

4. Select Pair Device (Phone).

A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used is Step 6.

5. Start the pairing process on the cell phone to be paired to the vehicle. See the cell phone manufacturer's user guide for information on this process.

6. Locate the device named “Your Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 4. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone.

This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “<Phone name> has been successfully paired” after the pairing process is complete.

7. Repeat Steps 1 through 6 to pair additional phones.

Listing All Paired and Connected Phones

1. Press the CONFIG button.

2. Select Phone Settings or Bluetooth Settings (depending on the radio).

3. Select Bluetooth.

4. Select Device List.

Deleting a Paired Phone

1. Press the CONFIG button.

2. Select Phone Settings or Bluetooth Settings (depending on the radio).

3. Select Bluetooth.

4. Select Device List.

5. Select the phone to delete and follow the on screen prompts.

Linking to a Different Phone

To link to a different phone, the new phone must be in the vehicle and available to be connected to the Bluetooth system before the process is started.

1. Press the CONFIG button.

2. Select Phone Settings or Bluetooth Settings (depending on the radio).

3. Select Bluetooth.

4. Select Device List.

5. Select the new phone to link to and follow the on screen prompts.

If delete is selected, the highlighted phone will be deleted.

    See also:

    Programming Universal Home Remote — Rolling Code
    For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a g ...

    Lock Doors
    Press the customization button until LOCK DOORS: IN GEAR appears in the display. To select your preference for automatic locking, press the select button while LOCK DOORS: IN GEAR is displayed on ...

    2012 Buick Regal Review by Warren Brown
    It was a good car, but something less than the “high-performance variant” of the Buick Regal promised for market delivery in the spring of 2012. That will be the overtly sporty Regal GS, with ...