Creating Playlists
To create a playlist using tracks stored in MEM:
1. Select Playlist from the MEM favorites.
2. Select the track to be stored in the playlist.
3. Press and hold one of the 1 to 6 buttons until the track can be heard again to store the track.
4. Repeat Steps 1 through 3 to store additional tracks in the playlist.
See also:
Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following:
1. Open the hood.
2. Remove the grille by grasping and pulling it
forward.
3. Lift the two headlamp retaining clips.
4. Pull the headlamp assembly away from ...
Removal and Installation of the Sealant
Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from the canister (A).
3. Pull up on the canister (A) to remove it.
4. Replace with a new canister which ...
Instrument Panel Overview
A. Air Vents .
B. Headlamp High/Low-Beam Changer.
Turn and Lane-Change Lever. See Turn and Lane-Change Signals . Driver Information
Center (DIC) Buttons. See Driver Information Center (DIC) .
...