Wheel Replacement

Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced.

If the wheel leaks air, replace it.

Some aluminum wheels can be repaired. See your dealer if any of these conditions exist.

Your dealer will know the kind of wheel that is needed.

Each new wheel should have the same load-carrying capacity, diameter, width, offset, and be mounted the same way as the one it replaces.

Replace wheels, wheel bolts, wheel nuts, or Tire Pressure Monitor System (TPMS) sensors with new GM original equipment parts.

Using the wrong replacement wheels, wheel bolts, or wheel nuts can be dangerous.WARNING
Using the wrong replacement wheels, wheel bolts, or wheel nuts can be dangerous. It could affect the braking and handling of the vehicle. Tires can lose air, and cause loss of control, causing a crash. Always use the correct wheel, wheel bolts, and wheel nuts for replacement.

Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis.

See If a Tire Goes Flat  for more information.

Used Replacement Wheels

Replacing a wheel with a used one is dangerous. How it has been used or how farWARNING
Replacing a wheel with a used one is dangerous. How it has been used or how far it has been driven may be unknown. It could fail suddenly and cause a crash.

When replacing wheels, use a new GM original equipment wheel.

    See also:

    Exterior Lighting
    The exterior lamp control is located to the left of the steering column on the instrument panel. : Briefly turn to this position to turn the automatic lamp control off or on again. AUTO: Turn ...

    Audio Output
    Audio from the DVD player or auxiliary inputs can be heard through the following sources: ► Wireless headphones . Vehicle speakers . Vehicle-wired headphone jacks on the RSA system, if the ...

    Setting the Tone (Bass/Midrange/Treble)
    AUDIO: Push and release the AUDIO knob until BASS, MID (midrange) (without BoseВ®), or TREB (treble) displays. Turn the knob to increase or to decrease the tone. The display shows the bass, midran ...