Clock

To adjust the time and date:

1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press 2. Press  to display HR, MIN, MM, DD, to turn the radio on.
2. Press YYYY (hour, minute, month, day, and year). to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year).
3. Press the pushbutton located under any one of the labels to be changed.
4. To increase the time or date, do one of the following:

► Press the pushbutton below the selected label.

► Press ► Press  FWD. SEEK.

► Press ► Turn  clockwise. FWD.

► Turn 5. To decrease the time or date, do one of the following: clockwise.

5. To decrease the time or date, do one of the following:

► Press ► Press  REV. SEEK.

► Press ► Turn  counterclockwise. REV.

► Turn To change the time default setting from 12 hour to 24 hour or to change the date counterclockwise.

To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:

1. Press located under the forward arrow that displays on the radio screen until the time and then the pushbutton located under the forward arrow that displays on the radio screen until the time 12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and month) display.
2. Press the pushbutton located under the desired option.
3. Press default, or let the screen time out. again to apply the selected default, or let the screen time out.

    See also:

    Front Seat
    Front Seat To raise or lower the head restraint, press the release button located on the side of the head restraint and pull up or push the head restraint down and release the button. Pull ...

    Starting Procedure (Keyless Access)
    1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go ...

    Canceling a Remote Start
    To cancel a remote start, do one of the following: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. • Turn on the hazard warning flashers. ...